|
|
 |
|
25 Gauge System
|
|
 |
With an Ergonomic Inserter
The MID Labs 25 Gauge Channel System Inserter provides a solid wire trocar mounted to an ergonomic handle.
The Inserter comes with the 25 Gauge Cannula pre-installed and is delivered in a safe, retracted position.
|
|
|
|
|
|
|
Delivering a Self-Sealing Cannula
The stainless steel Cannula is complete with a self-sealing cap, eliminating the need for plugs.
Stainless steel construction provides low insertion force and prevents collapse or separation.
The self-sealing cap is designed with a beveled cup for easy insertion of 25 Gauge instruments.
|
|
|
|
|
Top of the Page
|
|
Complementing a High Speed Vitrector
The MID Labs 25 Gauge Vitrector is offered in four pressure ranges, for use with any ophthalmic system
with a pneumatic vitrector drive. The MID Labs 25 Gauge Vitrector is capable of 2500 cuts per minute
on all compatible systems.
|
|
Offering Uncompromising Performance
The MID Labs 25 Gauge System is designed to precisely complement the surgeon's skills while substantially reducing
the time required for routine procedures.
|
|
|
|
|
|
AVE (Adaptable Vit Enhancer)
|
Top of the Page |
|
With the Adaptable Advantage
The AVE offers almost all vitrectomy system users a sophisticated, yet inexpensive
upgrade path to high-speed vitreous cutting. It will work with virtually
any surgical system that has a vitreous cutter drive source, either pneumatic or electrical.
|
|
MID Labs Offers
The AVE provides the means of operating a MID Labs DuraProbe Vitrector at up to 2500
cuts per minute. The AVE is a self- contained console with an internal compressor. It utilizes
proprietary pulse waveform shaping technology (U.S. Patent 6,575,990) to drive the performance-matched
vitreous cutter.
|
|
High Speed Cutting up to 2500 Cuts/Min
The pressure required by the DuraProbe Vitrector is one half that of the most popular
pneumatic vitrectors. Lower pressure results in less power introduced into the cutter,
allowing for finer control, quieter operation and less vibration over the entire cutting range.
|
|
|
Vit Enhancer
|
Top of the Page |
|
With the Vit Enhancer
The Vit Enhancer offers vitrectomy system users a sophisticated, yet inexpensive and compact
upgrade path to high-speed vitreous cutting. It will work with most vitrectomy systems which currently
employ conventional low speed pneumatic vitreous cutters.
|
|
MID Labs Offers
The Vit Enhancer provides the means of operating a MID Labs LP Vitrector at up to 1500 cuts per minute.
It synthesizes a low-pressure, shaped-wave pneumatic pulse train from the Host system's
pneumatic output. The Vit Enhancer is very light as it does not contain a secondary compressor,
and it does not require substantial AC power.
|
|
Compact High Speed Cutting to 1500 Cuts/Min
The pressure required by the LP Vitrector is one half that of the most popular
pneumatic vitrectors. Lower pressure results in less power introduced into the cutter,
allowing for finer control, quieter operation and less vibration over the entire cutting range.
|
|
|